Easy Laser XT770 +GEO Laser Alignment System

The XT770 Shaft+GEO system has all the programs and functions you need to install and keep your machines up and running. Compared to the standard XT770 Shaft it also comes with a separate laser transmitter. With XT770 Shaft+GEO you can carry out the following:

* Align the machine
* Check soft foot​
* Check twist and flatness
* Check straightness
* Measure machine movement over time

With XT770 Shaft+GEO you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure straightness, flatness and twist of foundation, soft foot, bearing clearance, and more.

2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position.

You have a choice of five shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.

Laser transmitters for geometric measurements

The system includes laser transmitter XT20 or XT22, which allow you to take flatness and straightness measurements with the highest reliability and precision.

- XT20 is perfect for checking flatness and straightness during machine installation or surface flatness of machined parts.
- XT22 also lets you point the laser beam perpendicular to the laser plane. It provides more options for geometrical measurements, and even higher accuracy and precision.

Measuring units XT70-M / XT70-S

The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.

Rigid and rugged

The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features: 

- Built-in wireless technology. Integrated rechargeable battery. 
- TruePSD technology with unlimited resolution for greatest accuracy.
- Dual laser beams and PSDs.
- Sturdy aluminium body. IP66/67 design.
- OLED display shows the angle of the unit 
- Slideable target
- 24 hours operating time

Display unit XT12 

Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen

A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (accessory).

Features: 

- Robust, rubber coated design, IP66/67.
- Large 8” glove enabled touch-screen.
- IR Camera for thermal images (optional).
- 16 hours operating time.

XT20 Laser transmitter

Laser transmitter XT20 can be used to measure flatness and straightness. The laser beam can sweep 360° with a measurement distance of up to 20 metres [65´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw. The laser head fine turning knob makes it very easy to point the beam at the detector also on long distances (gear ratio 1:132).

We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).

The XT transmitters have wireless connection to our XT Alignment App. This means that you get warning messages during measurement about events that can affect the result negatively, for example if the transmitter position might have been affected, or temperature changes inside the unit. We can also let the app guide you step-by-step when calibrating the levels before measuring.

The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.

The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.

XT22 Laser transmitter

Laser transmitter XT22 can be used to measure flatness, straightness, squareness, level and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser head is super stable, but still easy to turn. No need for locking/unlocking screw.

We have installed electronic precision vials in the XT transmitters. This gives the advantage of faster feedback when levelling and less risk of errors during calibration, because all users see the same angular value (compared with reading spirit levels).

The laser beam can be pointed perpendicular to the flatness plane, within 0.01 mm/m [0.01 mils/inch]. XT22 has a fine turning mechanism for the laser head with a gear ratio of 1:1320, which makes it super easy to point the beam at the detector also on very long distances.

The fiber-coupled laser creates an extremely smooth laser beam profile, free from reflections and irregularities. This means that the laser beam will have very good optical properties in terms of straightness (± 0.003 mm [± 0.12 mils]).

The transmitter has many mounting options. The three super magnets can be mounted at many different positions on the transmitter, making it possible to also place the transmitter on a small surface, when needed.

The Multi-bracket (included) provides a lot of extra, versatile mounting possibilities, for example mounting on tripod, magnet bases, or rods to elevate the transmitter.

Specifications:

Display Unit

- Name: XT12- Type of display/size: 8" LCD capacitive multi-touch colour display
- Internal battery (fixed): Heavy duty Li Ion chargeable
- Connections: USB A, USB C, Charger, AV
- Operating temperature: -10–50 °C
- Storage temperature: -20–50 °C
- Communication: Wireless technology, WiFi
- Relative humidity: 10–95%
- Loundspeakers: Built-in, rear-facing
- Charger: 15 V
- Camera: 13 Mp autofocus, with LED diode
- IR camera (optional): FLIR LEPTON (0–400 °C, 32–752 °F)
- Help functions: Built-in manual
- Environmental protection: IP class 66 and 67. Designed for outdoor use (pollution degree 4)
- Housing material: PC/TPE or PC/TPU
- Dimensions: WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
- Weight (without batteries): 1400 g [49.4 oz]
- Operating time: Up to 16 h continuously

Measuring Units

- Name: XT70-M / XT70-S
- Communication: BT wireless technology
- Type of detector: 2 axis TruePSD 20x20 mm [0.79x0.79"]
- Resolution: 0.001 mm [0.05 mils]
- Measurement accuracy: ±1µm ±1%
- Measurement range: Up to 20 m [66 feet]
- Type of laser: Diode laser
- Laser wavelength: 630-680 nm
- Laser class: Safety class 2
- Laser output: <1 mW
- Electronic inclinometer: 0.1° resolution
- Environmental protection: IP class 66 and 67
- Operating temperature: -10–50 °C
- Storage temperature: -20–50 °C
- Relative humidity: 10–95%
- Housing material: Anodized aluminium + PC/ABS + TPE
- Dimensions: WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
- Weight: 272 g [9.6 oz]
- OLED display: 128x64 pixels
- Operating time: Up to 24 h continuously

Package Includes:

- 1 XT12 Display unit
- 1 Measuring unit XT70-M
- 1 Measuring unit XT70-S
- 1 Laser transmitter XT20 or XT22
- 1 Multi-bracket for laser transmitter
- 2 Shaft brackets with chains and rods 120 mm [4.72"]
- 1 Set of rods 4×75 mm [2.95"]
- 2 sets of rods 4×120 mm [4.72"]
- 1 Magnet base
- 1 Magnet base with turnable head 
- 2 Offset brackets
- 2 Extension chain 900 mm [35.4"]
- 1 Measuring tape 3 m [9.8']
- 1 Hexagon wrench set
- 1 Charger (100–240 V AC)
- 1 DC split cable for charging
- 1 DC to USB adapter, for charging
- 1 Quick reference manual
- 1 Cleaning cloth for optics
- 1 USB memory with manuals
- 1 Carrying Large GEO, with wheels
- 1 Set of QR code stickers