Trimble GNSS Receiver Ag392 (NAV900) RTK + display IntelViewIV (Fred2) + NavController3 CNH

This Trimble GNSS receiver Ag392 (NAV900) comes with an IntelViewIV display and NavController3 CNH to provide precise GPS guidance for agriculture and forestry applications. The system is made by Trimble and has a model number of New Holland NAV 900. It was manufactured in Mexico and is a complete GPS system, perfect for those in need of accurate guidance equipment.

The NAV-900 guidance controller is our most advanced GNSS receiver to date, built for maximum uptime and a wide range of accuracy options from basic to high precision. It is designed to mount on the roof of most agricultural vehicles to provide positioning and guidance, including autosteer.

Easy Installation

Designed from the ground up to install quickly, the NAV-900 guidance controller along with a compatible GFX series display can be installed with an autoguidance system in just half a day in most vehicles or in under two hours if using manual guidance, eliminating costly downtime in the field.

Expanded GNSS

This new guidance controller features Trimble’s most powerful GNSS engine. It tracks more satellites from more constellations, leading to more robust performance in harsh environments and also faster RTX convergence time.

CenterPoint RTX

CenterPoint RTX provides real-time, centimeter-level positions worldwide, creating input savings by decreasing pass-to-pass overlap. Discover the savings you can achieve by using CenterPoint RTX in your operation.

High accuracy <2.5 cm (1″) correction service, delivered via satellite. Ideal for planting/seeding, spraying, and strip tilling.

Features:

- Full range of correction signals including GPS, GLONASS, Galileo, Beidou, and QZSS constellations
- Built in Bluetooth for tethering and device connections
- Simplified setup with fewer components
- Combine with one of the GFX series displays for auto guidance and precision farming functions

Specifications:

Guidance
- Electric: Autopilot Motor Drive
- Guidance Ready: CANBus J1939
- Hydraulic: External NAV III Autopilot

Housing & Mechanical
- Housing Material: Low-profile, chemicalresistant polymer casing with UV-resistant paint
- Size: 213 x 213 x 80 mm (8.39 x 8.39 x 3.15 in)
- Weight: 1.2 kgs (2.6 lbs)
- Mounts: Trimble custom, OEM compatible, Spar

Connectors
- To GFX-750: M12 4-pin connector
- To External Radio: M12 5-pin connector
- For I/O: Deutsch 12-pin connector

Communication and I/O
- Bluetooth: Bluetooth 4.1
- Serial Ports: 1 Tx/Rx, 1 Tx only
- CAN Ports: 2
- BroadR-Reach: Port: 1
- Digital Out: Sonalert
- Analog In: Remote engage
- NMEA Output: 1, 5, 10, Hz 

GNSS Receiver Specifications
- Constellations:
  * GPS: L1 C/A, L1C, L2E, L2C, L5
  * GLONASS: L1 C/A, L1P, L2P, L2 C/A, L3 CDMA
  * Galileo: E1, E5A, E5B, E5AltBOC
  * BeiDou: B1C, B1I, B2I,B2A
  * QZSS: L1 C/A, L2C, L5
- Satellite Corrections:
  * CenterPoint RTX Fast
  * CenterPoint RTX
  * RangePoint RTX
  * SBAS (WAAS, EGNOS, SLAS)
  * xFill
- Land-Based Corrections: CenterPoint RTK, CenterPoint VRS
- Correction Formats: CMR+, sCMR+, sCMR+ with SecureRTK, CMRx, RTCM 3.0, RTCM 3.1, RTCM 3.2, RTCM 3.3

Inertial Measurement Unit (IMU)
- Gyroscope: 3-axis, 200 Hz
- Accelerometer: 3-axis, 200 Hz

Power
- Power: 9 - 16 VDC, 5.5 W 17.5 W with external accessories connected
- Output Power: 12 VDC, 12 W Maximum current for external radio: 1 A

Operational Range
- Operating Temperature:  –40 °C - 70 °C (–40 °F - 158 °F) 
- Storage Temperature: –40 °C - 85 °C (–40 °F - 185 °F)
- Humidity: up to 100%, ondensing
- Ingress Protection: IP66, dustproof, waterproof, IPx9K